You may need to configure a proxy server in the Edge browser for a number of reasons, including the fact that proxy servers are helpful tools for accessing websites and concealing online activity.
One typical reason is to browse websites anonymously, especially when traveling or visiting websites that might be blocked in some areas.
Proxy servers' ability to conceal IP addresses and encrypt internet traffic makes them useful for increasing online privacy.
Moreover, proxy servers can enhance network speed and performance through the use of compression techniques, which can be very helpful for companies who are experiencing performance concerns. Moreover, proxy servers can be used to get through firewalls and content filters, which may be particularly helpful in institutions or nations where internet access is strictly controlled.
Steps to Set Up Proxies in Edge Browser
Attention. The Microsoft Edge browser does not have its own network settings, but uses system network settings. Enabling, changing, or disabling the use of proxies will therefore affect other browsers (e.g. Opera and Chrome) or any other programs that also use system network settings.
Install a HTTP/HTTPS Proxy in Edge
In this step-by-step tutorial, we'll show you how to properly install an HTTP proxy in the Microsoft Edge browser.
- Open the browser settings menu by clicking on the three dots ... in the upper right corner of the screen.
- Select "Settings" in the menu that appears.
- On the left side of the menu, select "Advanced".
- In the "Proxy setup" area, click the "Open proxy settings" button.
- In the displayed Windows system settings screen, in the "Proxy" section, under the "Manual proxy setup" subsection, move the "Use a proxy server" slider to the "On" position.
- In the "Address" and "Port" fields, enter the data received from the proxy provider, i.e. proxy IP address and port. Then save the changes by clicking the "Save" button.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Setting up SOCKS Proxies in Edge
Unfortunately, Edge does not support SOCKS proxies. If you want to use SOCKS proxies in a browser, we recommend Mozilla Firefox or Tor browser. You can also use the Google Chrome browser with installed FoxyProxy addon.
Setting Different Proxies in Different Browsers at the Same Time
Quite often there is a problem of using different proxies in 2 or more browsers in parallel. It especially concerns the simultaneous use of different proxies in Edge and Chrome browsers. Below we show you how to set one proxy server for Edge browser and another proxy server for Chrome browser.
A special feature (or disadvantage) of both of these browsers (Chrome and Edge) is that they do not have their own network settings. Both browsers use Windows system settings. Thus, when you set a proxy server in one of the browsers, you automatically change the settings for the second browser as well.
You can solve this problem in different ways. We will list three of them.
The first method. Use another browser instead of Chrome or Edge, such as Mozilla Firefox. This browser has its own network settings, separate from the network settings of the Windows operating system. If you install one proxy server in Firefox, you can easily install another proxy in Chrome or Edge. So you can use two different proxies in different browsers.
The second method. Download and install the Foxyproxy Addon for Chrome. Foxyproxy will allow you to set up a separate proxy server for Chrome. At the same time you will be able to use another proxy server in Edge browser.
- The third, most advanced method. Use a stand-alone proxy program, such as Proxifier. With Proxifier, you can configure each individual browser to work with its own specific proxy server by simply setting up separate rules for each browser.
Disabling Proxies in Edge
To completely disable proxies in Edge, you need to move the slider opposite the "Use a proxy server" inscription to the "Off" position.
You can check if the proxy server is no longer being used by going to the IP address discovery page.
Note that from this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
In conclusion, setting up a HTTP proxy in Edge Browser is a simple process that can enhance your browsing experience by providing you with improved privacy and access to restricted websites. We have described in this guide the steps for setting up a proxy in Edge Browser, deactivating a proxy in Edge Browser, and using two separate proxy servers in Edge Browser and Chrome Browser. By following these steps, you can easily customize your browsing experience and ensure that your online activities are safe and secure. So go ahead and give it a try!
https://proxycompass.com/knowledge-base/how-to-set-up-proxy-servers-in-the-edge-browser/
Freitag, 7. Juni 2024
Donnerstag, 6. Juni 2024
The most common reason for using proxy servers, or proxies as they are called, is anonymization. This is because they can be used to hide the user's own IP address. Since the use of proxies allows the supposed geo-position of the user to be changed, they are often used to circumvent the blocking of websites in certain countries. However, proxies are also often used to increase speed and save bandwidth on a network so that users on the network can access the Internet quickly and easily.
To find out more, read the article 'What is a Proxy Server'.
In this tutorial we will tell and show you how to set up a proxy server to work in the Mozilla Firefox browser. You can use the clickable table of contents to quickly navigate to the desired section of the article.
Setting Up a HTTP & SOCKS Proxy in Mozilla Firefox
Important. Unlike Chrome, Opera, and MS Edge, the Mozilla Firefox browser has its own internal browser network settings. This means that entering proxy server data (IP address and port) into Firefox settings will only affect the operation of the browser itself. All other programs on your device will continue to work according to the network settings of your Windows, Linux or macOS operating system.
The second special feature of the Firefox browser is that it fully supports the SOCKS protocol, including its most advanced version, SOCKS5. This means that you don't need to install any additional add-ons to work with the most popular HTTP or SOCKS proxy protocols in the Firefox browser.
Quick Guide to Configure a Proxy Server in Firefox
Here is a quick guide to setting up a proxy server in Firefox on Windows, Mac, and Linux.
Proxy in Mozilla Firefox on Windows:
Open Firefox and click on the menu button (three horizontal lines) on the top right corner.
Go to Options and click on the Advanced icon on the left side of the Preferences window.
Click on the Network tab at the top and then click on the Settings button under Connection.
In the Connection Settings window, select Manual proxy configuration and enter the proxy server details including the IP address and port number.
Check the box next to "Use this proxy server for all protocols" and click on OK to save the settings.
Proxy in Mozilla Firefox on macOS:
Open Firefox and click on Firefox in the menu bar at the top of the screen.
Select Preferences from the drop-down menu.
On the left side of the screen, click the General selector.
Scroll down to the bottom of the window and click on Settings under the Network settings section.
In the Connection Settings window, select Manual proxy configuration and enter the proxy server details including the IP address and port number.
Check the box next to "Use this proxy server for all protocols" and click on OK to save the settings.
Proxy in Mozilla Firefox on Linux:
Open Firefox and click on the menu button (three horizontal lines) on the top right corner.
Go to Preferences and click on the Advanced icon on the left side of the Preferences window.
Click on the Network tab at the top and then click on the Settings button under Connection.
In the Connection Settings window, select Manual proxy configuration and enter the proxy server details including the IP address and port number.
Check the box next to "Use this proxy server for all protocols" and click on OK to save the settings.
It's worth noting that the steps may vary slightly depending on the version of Firefox and operating system being used.
Detailed Guide on How to Set Up a Proxy in Firefox
Steps to Set Up Proxies in Firefox Browser
- Open the browser settings menu by clicking on the three horizontal stripes in the upper right corner of the screen and then on the menu item "Options".
- The entire browser settings menu is displayed.
- Scroll to the "Network Settings" section on the right side of the menu and click on the "Settings..." button.
- Unlike other browsers, Mozilla Firefox can natively use proxies, i.e. without using Windows system settings.
- To configure the use of a proxy server via HTTP/HTTPS, select the item "Manual proxy configuration". Enter the data received from the proxy provider in the "HTTP Proxy" and "Port" lines, i.e. proxy IP address and port. Then save the changes by clicking the "OK" button.
- To configure the use of a proxy server via the SOCKS protocol, select the item "Manual proxy configuration". Enter the data received from the proxy provider in the "SOCKS Host" and "Port" fields, i.e. proxy IP address and port.
Depending on the version of the SOCKS protocol supported by your proxy server, select the item "SOCKS v4" or "SOCKS v5". Then save the changes by clicking on the "OK" button.
Disabling Proxies in Firefox
To completely disable proxies in Firefox, you must change the option field in the "Configure Proxy Access to the Internet" section to "No proxy".
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Note that from this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
https://proxycompass.com/knowledge-base/how-to-set-up-a-proxy-server-in-the-mozilla-firefox-browser/
To find out more, read the article 'What is a Proxy Server'.
In this tutorial we will tell and show you how to set up a proxy server to work in the Mozilla Firefox browser. You can use the clickable table of contents to quickly navigate to the desired section of the article.
Setting Up a HTTP & SOCKS Proxy in Mozilla Firefox
Important. Unlike Chrome, Opera, and MS Edge, the Mozilla Firefox browser has its own internal browser network settings. This means that entering proxy server data (IP address and port) into Firefox settings will only affect the operation of the browser itself. All other programs on your device will continue to work according to the network settings of your Windows, Linux or macOS operating system.
The second special feature of the Firefox browser is that it fully supports the SOCKS protocol, including its most advanced version, SOCKS5. This means that you don't need to install any additional add-ons to work with the most popular HTTP or SOCKS proxy protocols in the Firefox browser.
Quick Guide to Configure a Proxy Server in Firefox
Here is a quick guide to setting up a proxy server in Firefox on Windows, Mac, and Linux.
Proxy in Mozilla Firefox on Windows:
Open Firefox and click on the menu button (three horizontal lines) on the top right corner.
Go to Options and click on the Advanced icon on the left side of the Preferences window.
Click on the Network tab at the top and then click on the Settings button under Connection.
In the Connection Settings window, select Manual proxy configuration and enter the proxy server details including the IP address and port number.
Check the box next to "Use this proxy server for all protocols" and click on OK to save the settings.
Proxy in Mozilla Firefox on macOS:
Open Firefox and click on Firefox in the menu bar at the top of the screen.
Select Preferences from the drop-down menu.
On the left side of the screen, click the General selector.
Scroll down to the bottom of the window and click on Settings under the Network settings section.
In the Connection Settings window, select Manual proxy configuration and enter the proxy server details including the IP address and port number.
Check the box next to "Use this proxy server for all protocols" and click on OK to save the settings.
Proxy in Mozilla Firefox on Linux:
Open Firefox and click on the menu button (three horizontal lines) on the top right corner.
Go to Preferences and click on the Advanced icon on the left side of the Preferences window.
Click on the Network tab at the top and then click on the Settings button under Connection.
In the Connection Settings window, select Manual proxy configuration and enter the proxy server details including the IP address and port number.
Check the box next to "Use this proxy server for all protocols" and click on OK to save the settings.
It's worth noting that the steps may vary slightly depending on the version of Firefox and operating system being used.
Detailed Guide on How to Set Up a Proxy in Firefox
Steps to Set Up Proxies in Firefox Browser
- Open the browser settings menu by clicking on the three horizontal stripes in the upper right corner of the screen and then on the menu item "Options".
- The entire browser settings menu is displayed.
- Scroll to the "Network Settings" section on the right side of the menu and click on the "Settings..." button.
- Unlike other browsers, Mozilla Firefox can natively use proxies, i.e. without using Windows system settings.
- To configure the use of a proxy server via HTTP/HTTPS, select the item "Manual proxy configuration". Enter the data received from the proxy provider in the "HTTP Proxy" and "Port" lines, i.e. proxy IP address and port. Then save the changes by clicking the "OK" button.
- To configure the use of a proxy server via the SOCKS protocol, select the item "Manual proxy configuration". Enter the data received from the proxy provider in the "SOCKS Host" and "Port" fields, i.e. proxy IP address and port.
Depending on the version of the SOCKS protocol supported by your proxy server, select the item "SOCKS v4" or "SOCKS v5". Then save the changes by clicking on the "OK" button.
Disabling Proxies in Firefox
To completely disable proxies in Firefox, you must change the option field in the "Configure Proxy Access to the Internet" section to "No proxy".
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Note that from this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
https://proxycompass.com/knowledge-base/how-to-set-up-a-proxy-server-in-the-mozilla-firefox-browser/
Mittwoch, 5. Juni 2024
Proxy servers are generally used to surf the Internet undetected, because they make it possible to hide one's IP address. However, with their help, blocked websites and services (e.g. messengers) can be accessed, as well as content that is only accessible in certain geo-locations. Companies often use proxies to block access to unwanted websites from the corporate network.
Steps to Set Up Proxies in Opera Browser
Attention! The Opera browser does not have its own network settings, but uses system network settings. Enabling, changing, or disabling the use of proxies will therefore affect other browsers (e.g. Edge and Chrome) or other programs that also use system network settings.
Setting Up HTTP/HTTPS Proxies in Opera
When using the Opera browser, HTTP proxies can be used for a number of things.
One reason for using an HTTP proxy in Opera is to improve online privacy and security. Using a proxy server can help protect your online privacy, as the website you are visiting will perceive the proxy as the actual visitor and not your computer.
Using an HTTP proxy in Opera is another way to bypass Internet content filters. When you access a website through a proxy server, you may be able to access content that is geographically prohibited because the website cannot detect your location.
Below we will show you step by step how to configure an HTTP proxy in the Opera browser.
- Open the browser settings menu by clicking on the three horizontal sliders in the upper right corner of the screen. Then click on "Go to full browser settings" at the very bottom of the menu that appears.
- Select "Advanced" on the left side of the displayed menu, scroll down the settings page to the "System" section and enter the Windows system settings menu by clicking "Open your computer's proxy settings".
- In the displayed Windows system settings screen, under the "Proxy" section and in the subsection "Manual proxy setup", move the "Use a proxy server" slider to the "On" position.
- In the "Address" and "Port" fields, enter the data received from the proxy provider, i.e. proxy IP address and port. Then save the changes by clicking the "Save" button.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Setting Up SOCKS Proxies in Opera
The Socket Secure or SOCKS proxy is an application-level proxy that is suitable for certain use cases, such as censorship evasion, access to restricted websites, torrent anonymization. It is also suitable for downloading most files from the Internet using programs such as JDownloader2.
Unlike Firefox and Tor browsers, Opera browser cannot fully work with SOCKS protocol. Therefore, if you need support for this protocol for use with the Opera browser, we recommend using the SimpleProxy addon, which can be downloaded from the official website.
Another interesting way to use Opera via SOCKS5 servers is described in detail in our article about using the Proxifier software.
Disabling Proxies in Opera
To reset the settings to the original state, simply move the "Use a proxy server" slider to the "Off" position.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Note that from this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
https://proxycompass.com/knowledge-base/setting-up-proxy-servers-in-the-opera-browser/
Steps to Set Up Proxies in Opera Browser
Attention! The Opera browser does not have its own network settings, but uses system network settings. Enabling, changing, or disabling the use of proxies will therefore affect other browsers (e.g. Edge and Chrome) or other programs that also use system network settings.
Setting Up HTTP/HTTPS Proxies in Opera
When using the Opera browser, HTTP proxies can be used for a number of things.
One reason for using an HTTP proxy in Opera is to improve online privacy and security. Using a proxy server can help protect your online privacy, as the website you are visiting will perceive the proxy as the actual visitor and not your computer.
Using an HTTP proxy in Opera is another way to bypass Internet content filters. When you access a website through a proxy server, you may be able to access content that is geographically prohibited because the website cannot detect your location.
Below we will show you step by step how to configure an HTTP proxy in the Opera browser.
- Open the browser settings menu by clicking on the three horizontal sliders in the upper right corner of the screen. Then click on "Go to full browser settings" at the very bottom of the menu that appears.
- Select "Advanced" on the left side of the displayed menu, scroll down the settings page to the "System" section and enter the Windows system settings menu by clicking "Open your computer's proxy settings".
- In the displayed Windows system settings screen, under the "Proxy" section and in the subsection "Manual proxy setup", move the "Use a proxy server" slider to the "On" position.
- In the "Address" and "Port" fields, enter the data received from the proxy provider, i.e. proxy IP address and port. Then save the changes by clicking the "Save" button.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Setting Up SOCKS Proxies in Opera
The Socket Secure or SOCKS proxy is an application-level proxy that is suitable for certain use cases, such as censorship evasion, access to restricted websites, torrent anonymization. It is also suitable for downloading most files from the Internet using programs such as JDownloader2.
Unlike Firefox and Tor browsers, Opera browser cannot fully work with SOCKS protocol. Therefore, if you need support for this protocol for use with the Opera browser, we recommend using the SimpleProxy addon, which can be downloaded from the official website.
Another interesting way to use Opera via SOCKS5 servers is described in detail in our article about using the Proxifier software.
Disabling Proxies in Opera
To reset the settings to the original state, simply move the "Use a proxy server" slider to the "Off" position.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Note that from this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
https://proxycompass.com/knowledge-base/setting-up-proxy-servers-in-the-opera-browser/
Dienstag, 4. Juni 2024
Do you want to use the Tor browser, but don't want anyone to know? Does your Internet service provider block Tor? In these cases, using proxies in the Tor browser makes sense.
In fact, by using proxies in Tor, you can mask its use. Also, proxies make it possible to use Tor in countries where this browser is blocked.
HTTP/HTTPS and SOCKS4/5 Proxy Setup
Attention. The Tor browser, just like the Mozilla Firefox browser from which it was developed, has its own internal browser network settings. This means that entering the proxy server data (IP address and port) into the Tor settings will only affect the operation of the browser itself. All other programs on your device will continue to work according to the network settings of your Windows or macOS operating system.
The second feature of the Tor browser is that it not only supports working with HTTP proxies, but also fully supports working with SOCKS proxies, including the most advanced version, SOCKS5. This means that you don't need to install any additional add-ons to be able to work with any proxy protocols in Tor Browser without any restrictions.
Steps to Set Up Proxies in the Tor Browser
- Open the browser settings menu by clicking on the three horizontal stripes in the upper right corner of the screen and then on "Options" from the menu.
- The full browser settings menu will be displayed. You need to click on "Tor" on the left side of the menu.
- On the right side of the menu, scroll down to the Advanced section, and enable the proxy server data entry form via the "I use a proxy to connect to the Internet" checkbox.
- To configure the use of a proxy server via the HTTP/HTTPS protocol, select the "HTTP/HTTPS" entry in the drop-down menu and enter the data received from the proxy provider (proxy IP address and port) in the "Address" and "Port" lines.
- To configure the use of a proxy server using SOCKS 4 and SOCKS 5 protocols, select the entry with the name corresponding to the required protocol from the drop-down menu and enter the data received from the proxy provider (proxy IP address and port) in the "Address" and "Port" lines.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Disabling proxies in Tor
To completely disable proxies in Tor, you need to uncheck the checkbox next to the "I use a proxy to connect to the Internet" label.
You can check if the proxy server is no longer in use by going to the IP address discovery page.
From this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
In conclusion, setting up a proxy server in Tor Browser can offer additional layers of anonymity and protection for users. Tor already provides anonymity by hiding user identity and encrypting web connections through a network of relays, but using a proxy server can further obscure the user's online activities.
Tor Browser can work with both HTTP and SOCKS proxies, and setting up a proxy is a straightforward process. Unlike browsers like Chrome, Opera, and Microsoft Edge, the Tor browser does not use the network settings of the operating system, but has its own network settings for the proxy server. Therefore, setting up a proxy in the Tor browser does not affect other programs.
While using a proxy server with Tor can offer additional anonymity, it's important to note that it may not always be necessary. For general internet browsing, Tor already offers robust privacy protections, and using a proxy server may slow down internet speeds or introduce other issues. It's up to individual users to determine whether using a proxy is worth the potential trade-offs.
Overall, understanding how to set up a proxy server in Tor Browser is a valuable skill for users who want to enhance their anonymity and privacy online. By following the simple steps outlined in this article, users can add an additional layer of protection to their online activities.
https://proxycompass.com/knowledge-base/how-to-set-up-proxy-servers-in-the-tor-browser/
In fact, by using proxies in Tor, you can mask its use. Also, proxies make it possible to use Tor in countries where this browser is blocked.
HTTP/HTTPS and SOCKS4/5 Proxy Setup
Attention. The Tor browser, just like the Mozilla Firefox browser from which it was developed, has its own internal browser network settings. This means that entering the proxy server data (IP address and port) into the Tor settings will only affect the operation of the browser itself. All other programs on your device will continue to work according to the network settings of your Windows or macOS operating system.
The second feature of the Tor browser is that it not only supports working with HTTP proxies, but also fully supports working with SOCKS proxies, including the most advanced version, SOCKS5. This means that you don't need to install any additional add-ons to be able to work with any proxy protocols in Tor Browser without any restrictions.
Steps to Set Up Proxies in the Tor Browser
- Open the browser settings menu by clicking on the three horizontal stripes in the upper right corner of the screen and then on "Options" from the menu.
- The full browser settings menu will be displayed. You need to click on "Tor" on the left side of the menu.
- On the right side of the menu, scroll down to the Advanced section, and enable the proxy server data entry form via the "I use a proxy to connect to the Internet" checkbox.
- To configure the use of a proxy server via the HTTP/HTTPS protocol, select the "HTTP/HTTPS" entry in the drop-down menu and enter the data received from the proxy provider (proxy IP address and port) in the "Address" and "Port" lines.
- To configure the use of a proxy server using SOCKS 4 and SOCKS 5 protocols, select the entry with the name corresponding to the required protocol from the drop-down menu and enter the data received from the proxy provider (proxy IP address and port) in the "Address" and "Port" lines.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Disabling proxies in Tor
To completely disable proxies in Tor, you need to uncheck the checkbox next to the "I use a proxy to connect to the Internet" label.
You can check if the proxy server is no longer in use by going to the IP address discovery page.
From this moment on, all connections to websites will be made from your real IP address, without the use of a proxy server.
In conclusion, setting up a proxy server in Tor Browser can offer additional layers of anonymity and protection for users. Tor already provides anonymity by hiding user identity and encrypting web connections through a network of relays, but using a proxy server can further obscure the user's online activities.
Tor Browser can work with both HTTP and SOCKS proxies, and setting up a proxy is a straightforward process. Unlike browsers like Chrome, Opera, and Microsoft Edge, the Tor browser does not use the network settings of the operating system, but has its own network settings for the proxy server. Therefore, setting up a proxy in the Tor browser does not affect other programs.
While using a proxy server with Tor can offer additional anonymity, it's important to note that it may not always be necessary. For general internet browsing, Tor already offers robust privacy protections, and using a proxy server may slow down internet speeds or introduce other issues. It's up to individual users to determine whether using a proxy is worth the potential trade-offs.
Overall, understanding how to set up a proxy server in Tor Browser is a valuable skill for users who want to enhance their anonymity and privacy online. By following the simple steps outlined in this article, users can add an additional layer of protection to their online activities.
https://proxycompass.com/knowledge-base/how-to-set-up-proxy-servers-in-the-tor-browser/
Montag, 3. Juni 2024
There are different reasons why proxies are used. On the one hand, they disguise the user's own IP address and thus offer a certain degree of anonymity. On the other hand, they can be used to change the user's geographical location to bypass geo-blocking of websites.
Faster network speeds, web data scraping, competitive research, and the use of multiple social media accounts are some other reasons for using proxies.
Below is a step-by-step guide on how to install proxies on Chrome browser.
Steps to Install Proxies in Chrome Browser
Attention! Google Chrome lacks its own network settings and it uses system network settings. Enabling, changing, or disabling the use of proxies will therefore affect other browsers (e.g. Edge and Opera) or other programs that also use system network settings.
A Short Description of Proxy Installation in Google Chrome
To install a proxy in Google Chrome, follow these steps:
Open Google Chrome and go to "Settings."
- Scroll down to "Advanced" and click it.
- Click "System" and then click "Open your computer's proxy settings."
This will launch the Network & Internet dialog box. Depending on your operating system, the next step will vary:
- For Windows, click on "LAN settings."
- For Mac, click on "Proxies" and then select "Web Proxy (HTTP)."
- For Linux, click on "Network Proxy" and then select "Manual."
- Enter the port number of the proxy in the Port section. If you're using our proxy service, the port number would be 8085 for HTTP proxies.
Click "Save" to apply the changes.
That's it! Your Google Chrome browser is now configured to use a proxy.
If this description of the installation is not enough, read the more detailed instructions below.
HTTP/HTTPS Proxy Installation
HTTP proxies are mainly used for browsing the Internet and are the most commonly used type of proxy. They work in browsers and on some other programs that support the HTTP protocol.
HTTPS proxies differ from HTTP in that they allow the transfer of all data between the user and the web server in encrypted form.
For more information on this topic read in the article HTTP and HTTPS proxies.
To configure the browser for use with an HTTP/HTTPS proxy, do the following:
- Open the browser settings menu by clicking the three dots ... in the upper right corner of the screen.
- Select "Settings" from the menu that appears.
- On the left side of the menu, click on "Advanced", then select "System" from the drop-down menu, and then open the Windows system settings by clicking on "Open your computer's proxy settings".
- In the displayed Windows System Settings screen, in the “Proxy” section and in the “Manual proxy setup” subsection, move the “Use a proxy server” slider to the “On” position.
In the "Address" and "Port" fields, enter the data received from the proxy provider, i.e. proxy IP address and port. Then save the changes by clicking the "Save" button.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Installing SOCKS Proxies in Google Chrome
The Socket Secure or SOCKS proxy is an application-level proxy suitable for specific use cases such as censorship evasion, access to restricted websites, torrent anonymization, in different messengers like Telegram, etc.
SOCKS proxies can be also used with browsers by either installing them as an extension or configuring the browser's settings to use a SOCKS proxy.
With a SOCKS proxy, all of the browser's traffic is channeled through a proxy server, which then forwards the information to the intended destination. For more detailed information read the article What are SOCKS Proxies.
Unlike Firefox and Tor browsers, the Chrome browser cannot fully work with the SOCKS protocol. Therefore, if you need to use SOCKS proxy with the Chrome browser, we recommend using the FoxyProxy add-on. FoxyProxy is one of the most popular browser extension for Google Chrome that allows users to change their default proxy settings with ease. The extension minimizes the process of configuring a computer to talk through a proxy server and provides a set of simplified, browser-based controls to manage proxy settings.
Disabling Proxies in Chrome
To completely disable proxies in Chrome, you need to move the slider located opposite the "Use a proxy server" text to the "Off" position.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
From this point on, all connections to websites will be made from your real IP address, without using a proxy server.
https://proxycompass.com/knowledge-base/how-to-set-up-proxy-servers-in-the-chrome-browser/
Faster network speeds, web data scraping, competitive research, and the use of multiple social media accounts are some other reasons for using proxies.
Below is a step-by-step guide on how to install proxies on Chrome browser.
Steps to Install Proxies in Chrome Browser
Attention! Google Chrome lacks its own network settings and it uses system network settings. Enabling, changing, or disabling the use of proxies will therefore affect other browsers (e.g. Edge and Opera) or other programs that also use system network settings.
A Short Description of Proxy Installation in Google Chrome
To install a proxy in Google Chrome, follow these steps:
Open Google Chrome and go to "Settings."
- Scroll down to "Advanced" and click it.
- Click "System" and then click "Open your computer's proxy settings."
This will launch the Network & Internet dialog box. Depending on your operating system, the next step will vary:
- For Windows, click on "LAN settings."
- For Mac, click on "Proxies" and then select "Web Proxy (HTTP)."
- For Linux, click on "Network Proxy" and then select "Manual."
- Enter the port number of the proxy in the Port section. If you're using our proxy service, the port number would be 8085 for HTTP proxies.
Click "Save" to apply the changes.
That's it! Your Google Chrome browser is now configured to use a proxy.
If this description of the installation is not enough, read the more detailed instructions below.
HTTP/HTTPS Proxy Installation
HTTP proxies are mainly used for browsing the Internet and are the most commonly used type of proxy. They work in browsers and on some other programs that support the HTTP protocol.
HTTPS proxies differ from HTTP in that they allow the transfer of all data between the user and the web server in encrypted form.
For more information on this topic read in the article HTTP and HTTPS proxies.
To configure the browser for use with an HTTP/HTTPS proxy, do the following:
- Open the browser settings menu by clicking the three dots ... in the upper right corner of the screen.
- Select "Settings" from the menu that appears.
- On the left side of the menu, click on "Advanced", then select "System" from the drop-down menu, and then open the Windows system settings by clicking on "Open your computer's proxy settings".
- In the displayed Windows System Settings screen, in the “Proxy” section and in the “Manual proxy setup” subsection, move the “Use a proxy server” slider to the “On” position.
In the "Address" and "Port" fields, enter the data received from the proxy provider, i.e. proxy IP address and port. Then save the changes by clicking the "Save" button.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
Installing SOCKS Proxies in Google Chrome
The Socket Secure or SOCKS proxy is an application-level proxy suitable for specific use cases such as censorship evasion, access to restricted websites, torrent anonymization, in different messengers like Telegram, etc.
SOCKS proxies can be also used with browsers by either installing them as an extension or configuring the browser's settings to use a SOCKS proxy.
With a SOCKS proxy, all of the browser's traffic is channeled through a proxy server, which then forwards the information to the intended destination. For more detailed information read the article What are SOCKS Proxies.
Unlike Firefox and Tor browsers, the Chrome browser cannot fully work with the SOCKS protocol. Therefore, if you need to use SOCKS proxy with the Chrome browser, we recommend using the FoxyProxy add-on. FoxyProxy is one of the most popular browser extension for Google Chrome that allows users to change their default proxy settings with ease. The extension minimizes the process of configuring a computer to talk through a proxy server and provides a set of simplified, browser-based controls to manage proxy settings.
Disabling Proxies in Chrome
To completely disable proxies in Chrome, you need to move the slider located opposite the "Use a proxy server" text to the "Off" position.
You can check if the IP changes have taken effect by going to the IP Address Discovery page.
From this point on, all connections to websites will be made from your real IP address, without using a proxy server.
https://proxycompass.com/knowledge-base/how-to-set-up-proxy-servers-in-the-chrome-browser/
Sonntag, 2. Juni 2024
There are some significant differences between IPv4 and IPv6 proxies. In this article, we will present the most important points and discuss whether it is worthwhile buying IPv6 proxies.
IPv4 and IPv6: The most important facts at a glance
IPv4 is the fourth version of the so-called Internet Protocol. The protocol forms an important technical basis of the World Wide Web. A maximum of 4,294,967,296 addresses can be assigned in a network. This standard was established as early as 1981.
IPv6 addresses (available since 1998) are network addresses that uniquely address a host within an IPv6 network. Unlike other addresses, an IPv6 host has several IPv6 addresses per interface. The addresses have different validity ranges, for example, local link and global. With IPv6, 3.4 x 10 to the power of 38 addresses can be assigned.
IPv4 uses 32-bit addresses and is 4 bytes (32 bits) in size. The 32 bits are divided into 8 bit (1 byte) blocks for better readability. A dot is inserted between the individual blocks. An example: The binary IPv4 address 01111111.0000000.00000000.00000001 gives the IPv4 address 127.0.0.1.
An IPv6 address, on the other hand, consists of 128 bits, which are divided into 8 x 16 bits because of their long length. Each 4 bits are represented as a hexadecimal number. A group of numbers is made up of 4 hexadecimal numbers. A colon is inserted between the groups. For the sake of simplicity, leading zeros in the blocks are left out. Thus a sequence of 8 zeros can be replaced by two colons. An example of an IPv6 address is:
2001 : 0000 : 0000 : 0000 : 0001 : 0000 : 0000 : 0001
IPv6: Low trust for large Internet services
The IPv4 standard is currently supported by all websites and Internet services. But the situation is different with IPv6: This standard is much less trusted, especially by the major service providers (e.g. Google, Facebook, and Instagram).
Nevertheless, IPv6 is still supported. According to Google, the share of users accessing the world's largest search engine with IPv6 is 29.62% - and rising. It is remarkable that the share of users with IPv6 has almost doubled since January 2017. IPv6 is most widespread in Western and Central Europe, North America, and Brazil as well as in India and Japan.
Is buying IPv6 proxies worthwhile?
In 2018, we conducted an experiment focusing on the applicability of IPv6 proxies. The goal was to evaluate the use of IPv6 in parsing Google result pages (SERPs). The following subnets were used:
- One IPv4 / 24 subnet (256 IP addresses)
- One IPv6 / 64 subnet (total number of IP addresses 18446744073709551616)
Requests were sent to the Google search engine from the available IP addresses. The result was astonishing: Both subnets used were simultaneously banned by Google. Captcha queries were displayed before the "ban". A little later a permanent ban was imposed. This was applied to all IP addresses contained in the subnet.
The result of the experiment may surprise many IT experts - after all, the IPv6 network contains a much larger number of IP addresses. Experiments conducted on social networks produced similar results: The use of an IPv6 proxy for the purpose of "mass following" (meaning the mass collection of social contacts) leads to an immediate ban on the IP addresses used. IPv6 is apparently seen as a sign of spam by these services.
Conclusion
Currently, it is not worthwhile to use an IPv6 proxy. However, it is quite possible that this will change in the long run. However, industry experts are relatively certain that the situation will not change at least in the coming months and years.
https://proxycompass.com/knowledge-base/what-are-ipv4-and-ipv6-proxies/
IPv4 and IPv6: The most important facts at a glance
IPv4 is the fourth version of the so-called Internet Protocol. The protocol forms an important technical basis of the World Wide Web. A maximum of 4,294,967,296 addresses can be assigned in a network. This standard was established as early as 1981.
IPv6 addresses (available since 1998) are network addresses that uniquely address a host within an IPv6 network. Unlike other addresses, an IPv6 host has several IPv6 addresses per interface. The addresses have different validity ranges, for example, local link and global. With IPv6, 3.4 x 10 to the power of 38 addresses can be assigned.
IPv4 uses 32-bit addresses and is 4 bytes (32 bits) in size. The 32 bits are divided into 8 bit (1 byte) blocks for better readability. A dot is inserted between the individual blocks. An example: The binary IPv4 address 01111111.0000000.00000000.00000001 gives the IPv4 address 127.0.0.1.
An IPv6 address, on the other hand, consists of 128 bits, which are divided into 8 x 16 bits because of their long length. Each 4 bits are represented as a hexadecimal number. A group of numbers is made up of 4 hexadecimal numbers. A colon is inserted between the groups. For the sake of simplicity, leading zeros in the blocks are left out. Thus a sequence of 8 zeros can be replaced by two colons. An example of an IPv6 address is:
2001 : 0000 : 0000 : 0000 : 0001 : 0000 : 0000 : 0001
IPv6: Low trust for large Internet services
The IPv4 standard is currently supported by all websites and Internet services. But the situation is different with IPv6: This standard is much less trusted, especially by the major service providers (e.g. Google, Facebook, and Instagram).
Nevertheless, IPv6 is still supported. According to Google, the share of users accessing the world's largest search engine with IPv6 is 29.62% - and rising. It is remarkable that the share of users with IPv6 has almost doubled since January 2017. IPv6 is most widespread in Western and Central Europe, North America, and Brazil as well as in India and Japan.
Is buying IPv6 proxies worthwhile?
In 2018, we conducted an experiment focusing on the applicability of IPv6 proxies. The goal was to evaluate the use of IPv6 in parsing Google result pages (SERPs). The following subnets were used:
- One IPv4 / 24 subnet (256 IP addresses)
- One IPv6 / 64 subnet (total number of IP addresses 18446744073709551616)
Requests were sent to the Google search engine from the available IP addresses. The result was astonishing: Both subnets used were simultaneously banned by Google. Captcha queries were displayed before the "ban". A little later a permanent ban was imposed. This was applied to all IP addresses contained in the subnet.
The result of the experiment may surprise many IT experts - after all, the IPv6 network contains a much larger number of IP addresses. Experiments conducted on social networks produced similar results: The use of an IPv6 proxy for the purpose of "mass following" (meaning the mass collection of social contacts) leads to an immediate ban on the IP addresses used. IPv6 is apparently seen as a sign of spam by these services.
Conclusion
Currently, it is not worthwhile to use an IPv6 proxy. However, it is quite possible that this will change in the long run. However, industry experts are relatively certain that the situation will not change at least in the coming months and years.
https://proxycompass.com/knowledge-base/what-are-ipv4-and-ipv6-proxies/
Samstag, 1. Juni 2024
Shared proxies offer a good and cost-effective option for the simultaneous use of multiple available IP addresses by many users for the purpose of using the Internet anonymously, bypassing web filters, gaining access to certain content that is otherwise blocked due to their location, saving costs, etc.
Also, shared proxies can provide useful services such as encryption, security, and speed, which are essential for certain tasks.
Shared proxies are also called semi-dedicated proxies. Semi-dedicated proxies are shared proxies with a limited number of users per IP address. Since fewer users share an IP address, these proxies are faster and more powerful than free public proxies.
For those interested in purchasing shared proxies, a variety of options tailored to different needs are available. You can explore and choose the right plan for your requirements at our Pricing Page.
Dedicated or private proxies, on the other hand, share an IP address with only one user at a time, making them even more secure and powerful.
Advantages of using shared proxies
- Reasonable price
- Just as reliable as private proxies. (At least for us. This means that if a customer buys any package, no matter if there are 50,000 shared proxies, all of them will be fully available and functional).
- Possibility to integrate web scraping tools for data extraction
- Bots can be used to automate data extraction
- A high degree of anonymity, because many users use the same IP address
- Integration of additional functions to increase efficiency for specific applications
Disadvantages of using shared proxies
- Bandwidth is shared between users, resulting in slower transmission as compared to private proxies
- Higher probability of running into a captcha
- Shared proxy IPs are generally more likely to be blocked at the target website than private proxies.
- Greater susceptibility to errors and security problems due to the neighbor effect.
- -Number of concurrent connections is lower as compared to private proxies. The proxy provider can adjust this number according to the current situation. In case of complaints from owners of third-party services, the number of concurrent connections allowed can be reduced to zero.
For example: a complaint comes from the owner of a website to the proxy provider about hacking attempts from IP addresses belonging to this provider. In this case, the proxy provider will either drastically reduce the number of concurrent connections or completely block access to this website through their shared proxy IPs.
The following proxy types have a multi-user proxy sharing model:
- Free or Public proxies
All free or public proxies are shared (shared proxies), so much so that the actual number of users is in the thousands. The same proxies are published on different resources. Sometimes the same proxy server can appear several times in the same list. That is, the same IP, but simultaneously reachable on different ports, for example x.x.x.x.x:3128 and x.x.x.x.x.x:1081. This means that a user of Zennoposter, Scrapebox, or GSA alone creates a double load for this proxy. And there can be hundreds or even thousands of such users. Because of this excessive load, these servers become overloaded by incoming traffic and go offline.
- Data center hosted proxies
Generally, proxy providers tend to specify a certain number of users, e.g. 3 or 5, but we do not recommend that users use this number as a criterion for selecting a particular provider. This is simply because the provider can write down any number, even 2, but the user cannot verify this number. Therefore we recommend the following procedure:
Ask different providers for a test of a proxy package and check the bandwidth of the channel, for example on YouTube or torrent. Providers usually allow you to test shared proxies for a few hours up to a day without any problems. It is also recommended to test the performance of resources on which the proxy will be used. This type of proxy should be discarded immediately, if the user intends to access Google services. In such cases, shared mobile proxies are more appropriate.
- Residential Proxys
All residential proxies are shared de facto, except in individual cases where the proxy provider explicitly states on the website that they have a separate, private proxy pool. The number of IPs in the pool, which the provider states on their website (e.g. 20 million IPs) are equal to the total number of IPs they actually have in a month. Every day the pool is updated by about 20-30%. This means that ideally, this residential proxy provider has 800,000 to 1 million IPs per day. If the customer only needs German IPs, then this means 50-100 thousand IPs at best. And all these IPs are used simultaneously by several hundred or even thousand users of this proxy service. Therefore, the probability that proxies will not work on a target website is quite high. The actual numbers depend on the current situation on a given day, as well as on the specific provider, how many users they have, and which country the customer is interested in. While proxies from e.g. Botswana are not very popular, proxies from the USA, UK, and Germany are always very high on the wish lists.
- Mobile Proxies
As we mentioned in the article "What are mobile proxies?", mobile proxy providers offer their customers the option of splitting the cost of a proxy among several people. This is a very good opportunity to get very trusted proxies at a relatively low price. Thanks to GNAT technology, the probability of the user being blocked at the target website is rather low, even with shared mobile proxies.
Why is this so? A short overview of GNAT technology
A mobile network operator has a certain pool of IPv4 addresses. In the case of Moscow, for example, there are about 14,000 addresses (the numbers are relatively similar for larger cities). Here the operator has at least 5 million subscribers, i.e. about 1250 people per IP address with an even distribution at a given time (in reality, the number of users of an address is much higher).
This technology is called GNAT. By exploiting its shortcomings and the lack of IPv4 addresses, mobile proxies make it possible to hide bots in the mass of normal smartphone users and significantly reduce the risk of blocking.
https://proxycompass.com/knowledge-base/what-are-shared-proxies/
Also, shared proxies can provide useful services such as encryption, security, and speed, which are essential for certain tasks.
Shared proxies are also called semi-dedicated proxies. Semi-dedicated proxies are shared proxies with a limited number of users per IP address. Since fewer users share an IP address, these proxies are faster and more powerful than free public proxies.
For those interested in purchasing shared proxies, a variety of options tailored to different needs are available. You can explore and choose the right plan for your requirements at our Pricing Page.
Dedicated or private proxies, on the other hand, share an IP address with only one user at a time, making them even more secure and powerful.
Advantages of using shared proxies
- Reasonable price
- Just as reliable as private proxies. (At least for us. This means that if a customer buys any package, no matter if there are 50,000 shared proxies, all of them will be fully available and functional).
- Possibility to integrate web scraping tools for data extraction
- Bots can be used to automate data extraction
- A high degree of anonymity, because many users use the same IP address
- Integration of additional functions to increase efficiency for specific applications
Disadvantages of using shared proxies
- Bandwidth is shared between users, resulting in slower transmission as compared to private proxies
- Higher probability of running into a captcha
- Shared proxy IPs are generally more likely to be blocked at the target website than private proxies.
- Greater susceptibility to errors and security problems due to the neighbor effect.
- -Number of concurrent connections is lower as compared to private proxies. The proxy provider can adjust this number according to the current situation. In case of complaints from owners of third-party services, the number of concurrent connections allowed can be reduced to zero.
For example: a complaint comes from the owner of a website to the proxy provider about hacking attempts from IP addresses belonging to this provider. In this case, the proxy provider will either drastically reduce the number of concurrent connections or completely block access to this website through their shared proxy IPs.
The following proxy types have a multi-user proxy sharing model:
- Free or Public proxies
All free or public proxies are shared (shared proxies), so much so that the actual number of users is in the thousands. The same proxies are published on different resources. Sometimes the same proxy server can appear several times in the same list. That is, the same IP, but simultaneously reachable on different ports, for example x.x.x.x.x:3128 and x.x.x.x.x.x:1081. This means that a user of Zennoposter, Scrapebox, or GSA alone creates a double load for this proxy. And there can be hundreds or even thousands of such users. Because of this excessive load, these servers become overloaded by incoming traffic and go offline.
- Data center hosted proxies
Generally, proxy providers tend to specify a certain number of users, e.g. 3 or 5, but we do not recommend that users use this number as a criterion for selecting a particular provider. This is simply because the provider can write down any number, even 2, but the user cannot verify this number. Therefore we recommend the following procedure:
Ask different providers for a test of a proxy package and check the bandwidth of the channel, for example on YouTube or torrent. Providers usually allow you to test shared proxies for a few hours up to a day without any problems. It is also recommended to test the performance of resources on which the proxy will be used. This type of proxy should be discarded immediately, if the user intends to access Google services. In such cases, shared mobile proxies are more appropriate.
- Residential Proxys
All residential proxies are shared de facto, except in individual cases where the proxy provider explicitly states on the website that they have a separate, private proxy pool. The number of IPs in the pool, which the provider states on their website (e.g. 20 million IPs) are equal to the total number of IPs they actually have in a month. Every day the pool is updated by about 20-30%. This means that ideally, this residential proxy provider has 800,000 to 1 million IPs per day. If the customer only needs German IPs, then this means 50-100 thousand IPs at best. And all these IPs are used simultaneously by several hundred or even thousand users of this proxy service. Therefore, the probability that proxies will not work on a target website is quite high. The actual numbers depend on the current situation on a given day, as well as on the specific provider, how many users they have, and which country the customer is interested in. While proxies from e.g. Botswana are not very popular, proxies from the USA, UK, and Germany are always very high on the wish lists.
- Mobile Proxies
As we mentioned in the article "What are mobile proxies?", mobile proxy providers offer their customers the option of splitting the cost of a proxy among several people. This is a very good opportunity to get very trusted proxies at a relatively low price. Thanks to GNAT technology, the probability of the user being blocked at the target website is rather low, even with shared mobile proxies.
Why is this so? A short overview of GNAT technology
A mobile network operator has a certain pool of IPv4 addresses. In the case of Moscow, for example, there are about 14,000 addresses (the numbers are relatively similar for larger cities). Here the operator has at least 5 million subscribers, i.e. about 1250 people per IP address with an even distribution at a given time (in reality, the number of users of an address is much higher).
This technology is called GNAT. By exploiting its shortcomings and the lack of IPv4 addresses, mobile proxies make it possible to hide bots in the mass of normal smartphone users and significantly reduce the risk of blocking.
https://proxycompass.com/knowledge-base/what-are-shared-proxies/
Abonnieren
Posts (Atom)